Showing posts with label
Voltage Level Shifting Circuit.
Show all posts
Showing posts with label
Voltage Level Shifting Circuit.
Show all posts
- Hardware Connection between Raspberry PI and Arduino Uno level Shifter circuit for Serial Port UART interfacing with each other.
- TX pin second last from Arduino GPIO is connected with 1.6K ohm resister and resistor is connected with RX pin of raspberry pi at pin number 5, again, this pin 5 is connected with Ground GND using 3.3kOhmResistor as shown.
- RX pin from Arduino board is directly connected with TX pin of Raspberry PI,there is no need to do voltage level shifting.
